top of page

Pool Equipment Repair in Ocoee, FL

Pool circulation equipment and plumbing from Kamikaze Cooling and Heating's Google Business Profile

Kamikaze Cooling and Heating LLC repairs pool pumps, filters, heaters, salt systems, lights and automation in Ocoee, about 25 miles and 34 minutes from our Clermont office by car. Most of the pool calls from this side of the service area come back to water that is not moving the way it should. Call 352-708-3100, or use the Book service button at the bottom of this page.
Kamikaze Cooling and Heating is an authorized warranty center for Jandy, Pentair, Raypak and AquaCal.

Circulation Comes First

When circulation drops, several things go wrong at once and they look unrelated: weak returns, a heater that will not fire, a salt cell that stops producing, a spa with soft jets. Modern equipment reports some of that itself. Jandy's JXiQ heater measures the temperature rise between its inlet and outlet to optimize flow and protect the heat exchanger and lists a minimum flow of 30 GPM, and Jandy's TruClear XL salt cell uses dual gas traps to stop producing chlorine when water is not flowing.
That is worth knowing before you call, because a heater that locks out and a cell that has gone quiet can both be telling you the same thing.

Pumps and Flow

Pumps, filters, valves and the basket that catches the debris. Describe what changed: a pump that will not hold prime, air in the basket, a filter gauge reading that has moved, or a noise that was not there last month.
Variable-speed pumps add a variable that older pumps did not have. Pentair's IntelliFlo3 runs at variable speed and flow, and a pump set to a low speed for long stretches moves less water by design. If the schedule or the speed changed recently, say so.

Pool Heaters and Heat Pumps

Gas heaters and electric heat pumps that will not start, trip out, show an error or never reach the temperature you set. Send the make and model, the code on the display, the water and set temperatures, and whether the pump is moving water. Jandy's JXiQ, for one, carries a low gas pressure switch that prevents ignition without enough gas pressure, so a heater that clicks and gives up can be a gas question or a flow question.

Salt Systems, Lights and Automation

Salt cells and power packs, pool lights, controllers and the apps that run them. Note the salt reading, the chlorine reading if you have one, and what the panel shows. If something changed on the app or the schedule, say that too, since a setting can look like a fault.

Brands, Parts and Warranty

We service and work on Jandy, Pentair and Raypak pool equipment, and on the other makes already installed on Central Florida pools. If the equipment may still be under a manufacturer's warranty, the office needs the make, model, serial number and installation date. Coverage depends on the equipment and the terms that came with it, and the office confirms it.

What to Send With an Ocoee Pool Request

For a pump or flow problem: the filter gauge reading, whether the skimmer is pulling air, the water level against the skimmer mouth, and the pump speed or schedule. For a heater: the display code, the water temperature, the set temperature and whether the pump is moving water. For salt and automation: the salt reading and what the panel or app shows. Photos of the pad and the label help more than a description.
Ocoee is a city in Orange County. Traffic between Ocoee and Clermont changes through the day, so morning and early afternoon requests are easier for the office to place than late-afternoon ones. Tell us where the pad is, whether there is a gate, and where a van can park.

Office Hours and After Hours

The office is open Monday to Friday, 8:30 a.m. to 4:30 p.m., and is closed Saturday and Sunday except for emergencies. Field service runs seven days a week by arrangement. Emergency and same-day service are available. Call 352-901-1393 after hours and to confirm same-day availability.

Frequently Asked Questions

Do You Repair Pool Equipment in Ocoee?

Yes. Ocoee is one of the cities in our Google service area. The office is in Clermont, about 25 miles and 34 minutes away, and it confirms scheduling for your address.

The Returns Are Weak but the Pump Is Running. What Should I Check?

Look at the filter gauge, the water level against the skimmer mouth, and whether the skimmer is pulling air. Note the pump speed or schedule if it is a variable-speed pump. Bring those numbers to the call and the office will confirm the visit.

The Panel Shows a Flow Error. Is the Heater Faulty?

Not necessarily. Heaters and salt cells both watch water movement, and a flow fault is a system question rather than a verdict on one part.

Do You Work on Salt Systems and Pool Lights?

Yes. Salt cells, power packs, lights and the controllers that run them are all handled through this office.

Request Pool Equipment Service in Ocoee

Call 352-708-3100 for the office, or 352-901-1393 after hours. Use the Book service button below to send the address, the equipment, the symptoms, the access notes and who can approve the work.

bottom of page